Film saved per vehicle
AI nesting lays every panel of the car on the roll at once instead of cutting piece by piece, so the offcuts between panels shrink.
The real cost of hand cutting
Hand cutting looks free because it does not appear on an invoice. It shows up instead as film offcuts in the bin, as blade marks the customer notices a week later, and as a booking calendar that collapses the moment your best installer takes leave.
Vertical roll plotters solve part of this, but they arrive as one heavy frame that needs a forklift and a ground-floor unit, and most of them tie the pattern software to a compulsory yearly fee whether you cut ten cars or a thousand.
Our flatbed splits into sections for delivery, cuts PPF, tint, and interior decor film on the same bed, and bills pattern data by the square you actually use.
Honest Comparison
Manual vs vertical plotter vs flatbed
The honest comparison, including where a vertical plotter is still fine.
| What you compare | Hand cutting | Vertical roll plotter | Trimora flatbed |
|---|---|---|---|
| Where the blade touches | On the customer paint | Off the vehicle | Off the vehicle, on a vacuum bed |
| Layout time per vehicle | 20-40 min, by eye | 5-10 min | 2-5 min, AI auto-nesting |
| Typical film waste | High — recuts are common | Moderate | Lowest — whole-vehicle nesting |
| Who can operate it | Senior installer only | Trained operator | Trained operator, on-screen guidance |
| Getting it into your unit | N/A | One heavy frame — forklift, ground floor | Splits apart — stairs and normal doorways |
| Software cost model | Aucun | Usually a compulsory annual fee | Pay by square, or a plan if you prefer |
| Film types on one machine | Anything, slowly | PPF and tint | PPF, tint, decor, architectural, vinyl |
| Cut-through for shaped work | Oui | Kiss-cut only on most units | Full cut-through and kiss-cut, switchable |
Figures are typical shop observations, not lab results — your numbers depend on film brand, vehicle mix, and operator experience. Ask us for a workload estimate based on your actual daily car count.
Where the money comes back
Three lines on your P&L change first.
Saved per vehicle on cutting
Cutting and separating happen while the previous car is still being installed. There is no waste-weeding step.
Forced annual software fee
Top up pattern data by the square when you need it. A quiet month costs you nothing.
Opening a new shop? Here is the equipment list.
What a working PPF and tint bay actually needs on day one — we can quote the whole list, not just the machine.
Flatbed film cutter
ZT1612 for a single-bay shop, TR1660 when you expect volume or wider architectural rolls. Dual-head switches full cut and half cut automatically.
Vehicle pattern data package
20,000+ models with monthly updates. New machines include a starter allowance so you can cut from the first week.
Compressed air and power
The vacuum bed needs a compressor sized to your table. We confirm the spec against your unit before shipping.
Install bay lighting and bench
Even, high-CRI lighting over the car is what catches lift and contamination before the customer does.
Hand tools and consumables
Squeegees, heat gun, slip solution, blades, and lint-free cloth. Small spend, but it stalls a new shop when it is missing.
Operator training
Remote sessions until your team can go from vehicle lookup to finished cut without help. Included, not an upsell.
Other Industries
The same machine, a different job
Architectural & Home Film
Architectural & Home Film Solution
Window film projects live and die on batch throughput and repeatable sizing across hundreds of panes.
Read the full solution Advertising & Sign Vinyl
Advertising Vinyl Solution
Colour cards, sample boards, and shaped decals mean constant irregular cutting — and vinyl that has to be cut clean through.
Read the full solutionConsultation sur la découpeuse de film
Planifiez votre configuration de machine de découpe de film
Dites-nous quelle découpeuse vous envisagez, vos catégories de film, votre charge de travail quotidienne, la largeur du rouleau et vos besoins de support. Nous vous recommanderons la machine, le package de données logicielles et le chemin de configuration appropriés.
Détails de la machine recommandée
- Target film cutting machine: Z008, Z008 Ultra, TR1660, or software data package
- Flux de travail du film : PPF, film pour vitres, film changeant de couleur, décalcomanies ou travaux mixtes
- Charge de travail quotidienne des véhicules, nombre d'opérateurs, largeur de rouleau et région de livraison
- Installation, formation, mises à jour des données, OEM ou besoins de support après-vente