VD-75-S
VD Series Submersible Dewatering Pump
Stainless steel submersible pump for site dewatering, drainage and sump duty. It runs in the water it is moving, so the motor cooling comes free and there is nothing to prime.
- Continuous submerged duty with run-dry-tolerant seal chamber
- Open impeller against a replaceable wear plate: grit passes, clearance recovers
- Thermal contacts per phase and a seal-chamber moisture sensor wired out
- Hose or flanged discharge from the same unit
Specifications
- Flow
- 3 – 240 m³/h
- Head
- 5 – 85 m
- Motor
- 0.75 – 30 kW
- Solids
- To 12 mm
- Discharge
- 2" – 6", hose or flange
- Materials
- 316 stainless · Cast aluminium base
- Protection
- IP68, thermal and moisture sensors
Product detail
The VD Series is built for the places a surface pump cannot reach: excavation sumps, flooded basements, tunnel headings, storm tanks and quarry pits. The motor jacket is 316 stainless and the whole unit is rated for continuous submerged operation, with a run-dry-tolerant seal chamber for sumps that empty faster than the float can react.
The hydraulic end uses an open impeller against a replaceable wear plate, so grit is passed rather than trapped and the clearance is recoverable. A cast strainer base keeps the larger debris out, and the discharge takes either a hose coupling or a flanged connection.
Protection is built into the motor rather than bolted on: thermal contacts in each winding phase and a moisture sensor in the seal chamber, both wired out to the control cable so a starter can act on them.
Enquire about this model
VD Series Submersible Dewatering Pump
Include the flow, the head, the fluid and the temperature and we will confirm the impeller diameter, the motor rating and the seal plan for your duty point.
We reply to every enquiry within one business day.