CX-45
CX-45 Carpet Extractor
- Cleaning width
- 450 mm, cylindrical brush
- Tank capacity
- 45 L solution / 45 L recovery
BU-510
A 510 mm battery burnisher at 1,500 rpm with a passive dust skirt, for holding gloss on sealed floors between deep cleans.
A burnisher does one job: it puts the gloss back on a sealed or polished floor without stripping and re-coating it. The BU-510 runs a 510 mm pad at 1,500 rpm from a battery, so it works in retail and transport floors where a trailing cable is not acceptable.
Pad pressure is set by moving the machine’s own weight over the head rather than by a spring, so the pressure stays where the operator put it as the pad wears down. That is the difference between an even finish across a room and a bright patch where the operator started.
A passive skirt and a full-width dust brush hold most of the polish dust at the head. On floors where airborne dust is a problem, run the burnisher before the scrubber rather than after it, so anything that escapes is picked up in the next pass.
A 36 V, 100 Ah lithium pack gives about two hours of continuous burnishing. The pack is common with the WS-530, so a site running both machines carries one spare pack instead of two.
Enquire about this model
Include your floor area, surface type and cleaning window and we will confirm the exact build, lead time and shipping option.
Enquiry
We reply to every enquiry within one business day.
Please share your requirements, quantity, and specifications. We will reply promptly.