Trial bay 2 · Fairport
Sources from 1.5 to 30 kW are aligned on granite in our own optics room. Nothing gets crated until it has cut your steel in the trial bay and the parameter tables are signed off.
Most quoted
These six carry most of the trial cuts we run in a quarter.
Cassettes hold sheet by grade and gauge; the suction frame loads, the rake unloads.
View & InquireHandheld torch, wire feed synchronised, far less heat into the part than a TIG…
View & InquireThe galvo head marks serials and scales without moving the part or the fixture.
View & InquireA servo chuck feeds tube through the head while rising supports carry the free…
View & InquireThe exchange table swaps sheets while the cabin keeps cutting 3,000 x 1,500 mm…
View & InquireFlame-polished acrylic edges, plus plywood, felt and leather on a honeycomb bed.
View & Inquire
Frame shop
Welded frames go to the oven, then to the boring mill, and only then do the rails get shimmed to a laser tracker. Skip the oven and the geometry walks out of tolerance during the first hot summer of two-shift running.
How we test a beamOwners
The acceptance cuts ran on our own material at the agreed edge quality. Commissioning on our floor matched the protocol to the letter.
Job changeover is a program recall and a nozzle check. The parameter tables actually restore — that was new for us.
When cut quality drifted at month eight, remote diagnostics pointed at the protective window before our technician opened the head. The spare was already on the shelf.
Milestones
Four dated milestones. The FAT date is printed on the order confirmation, not negotiated later.
Drawings, grades, gauges and monthly quantities. One email is enough to start.
We cut your samples, then size the source, the bed format and the loading.
Frame, gantry and cabinet in our cells, then acceptance cuts against the protocol.
Levelling, gas hookup, two days of operator training, then the service line.
Power stability, focus diameter and BPP recorded against the source serial.
Trial cuts run on your grades and gauges before a source size is proposed.
Parameter tables restore per material, so a job change is a recall and a nozzle check.
Protective windows, lenses and nozzles ship serialised, matched to your head model.
Optics room
Each source is profiled on the optical bench for power stability and focus diameter, and the numbers travel with the serial number. Then the machine cuts your parts to the agreed edge grade, witnessed on site or on camera.
Ask for a test protocolBay by bay
Parameter sets travel between them, so an operator trained on the 3015 cabin is not relearning the tube bay.
Fiber Laser Cutters
Flatbed fiber laser cutting machines for sheet metal, from compact open beds to…
2 models
CO2 Laser Cutters
CO2 laser cutting machines for non-metals such as acrylic, wood, textiles and composites.
2 models
Laser Engravers
Desktop and enclosed laser engraving machines for detailed surface work on small parts.
2 models
Tube & Pipe Systems
Rotary-chuck laser systems that cut round, square and profile tube with automatic support.
2 models
Laser Welding
Handheld and robotic laser welding systems for clean seams with low heat input.
2 models
Marking Systems
Fiber laser marking stations for permanent, high-contrast part identification.
2 models
Automation & Loading
Sheet loading towers, transfer conveyors and material handling that keep machines cutting.
2 models
Chillers & Extraction
Recirculating chillers and fume extraction units that keep the process stable and the…
2 models
Optics & Consumables
Protective windows, focusing lenses, nozzles and ceramics matched to each cutting head.
2 models
We cut the samples on the machine we would quote you, photograph the edge, and send the parameter table with the price.
Scan with WeChat to start a chat.
Please share your parts, materials and target volumes. We will reply promptly.
