Closed-loop EC and pH correction on every irrigation event, not once per tank.
A six-channel fertigation skid that measures and corrects EC and pH inside each irrigation event, with dual-sensor verification before water reaches the crop.
Indicative lead time: 8 - 10 weeks
Batch tank systems mix a volume, measure it, and irrigate. If the recipe drifts, the whole batch drifts with it. The dosing unit injects and measures continuously in the delivery line, so a deviation is corrected within a few seconds of appearing rather than at the next tank fill.
Every measurement point carries two independent cells. Agreement within tolerance allows dosing to continue. Disagreement halts injection, flushes clean water, and raises an alarm. In eleven years of installed units this arrangement has never let an out-of-spec solution reach a crop.
Drain volume and drain EC are measured per valve group and fed back into the irrigation strategy. Rather than irrigating on a fixed clock, the unit targets a drain percentage band appropriate to the crop stage, which is where most of the water saving in a retrofit actually comes from.
Share your crop, compartment area and target climate. An application engineer replies within one business day.
Share your crop, compartment area and target climate. An application engineer replies within one business day.
A compartment-level climate controller that resolves heating, ventilation, screening and humidification against one vapour pressure deficit target instead of four competing loops.
A rack-and-pinion screen installation with controlled gapping, letting a house hold heat at night while still exchanging enough air to keep humidity…
Rail heating that puts pipe temperature at crop level and doubles as the transport rail, with mixing groups controlled per compartment.
Tell us the compartment area, the crop and the target climate. An application engineer replies within one business day.
