Energy & Shade Screen
A rack-and-pinion screen installation with controlled gapping, letting a house hold heat at night while still exchanging enough air to keep humidity…
- Maximum bay span 9.6 m
- Screen closure 99.2 % typical
- Gap resolution 1 %
LED Toplighting Bar
Passively cooled toplighting laid out to a DLI target and a uniformity figure.
A passively cooled horticultural LED bar specified by daily light integral and canopy uniformity rather than by installed wattage per square metre.
- Dimmable 0 - 100 % with no measurable spectral shift
- Passive extruded aluminium body, no fans to service
- Layout calculated to a target DLI and >90 % uniformity
- Hybrid operation alongside existing HPS installations
- Photometric file supplied for independent verification
Indicative lead time: 10 - 12 weeks
Wattage is not a specification
Asking for “150 watts per square metre” describes an electricity bill, not a crop response. Photosynthesis responds to the daily light integral reaching the canopy, so that is where our layouts start: your latitude, your glazing transmission, your screen schedule and your target DLI produce a fixture count and a hanging height. Installed wattage is an output of that calculation, not an input.
Uniformity decides the weakest row
A compartment averaging the right light level while varying ±25 % across the floor will be harvested at the rate of its darkest bays. Every GreenGrow lighting plan is delivered with a calculated uniformity map and we design to better than 90 % across the cropped area.
Living with existing HPS
Few growers replace an entire lighting installation at once. The toplighting bar is designed for hybrid rows, sharing an existing suspension grid and control group with HPS fixtures so a site can convert compartment by compartment as budget allows.
Inquiry
Request pricing for LED Toplighting Bar
Share your crop, compartment area and target climate. An application engineer replies within one business day.
- Sized configuration matched to your compartment area.
- Bill of materials and single-line schematic.
- Commissioning and training scope included in every quote.
Inquiry: LED Toplighting Bar
Share your crop, compartment area and target climate. An application engineer replies within one business day.
Related Systems
Often specified together
Hot Water Rail Heating
Rail heating that puts pipe temperature at crop level and doubles as the transport rail, with mixing groups controlled per compartment.
- Pipe diameter 51 mm
- Flow temperature 30 - 85 °C
- Rail gauge 550 mm
Roof Ventilation Drive
A rack-and-pinion roof vent drive with absolute position feedback, wind-side logic and a mechanical safety close that does not depend on the…
- Drive torque 750 Nm
- Vent length Up to 48 m per drive
- Opening angle 0 - 45°