+1 555 415 6642 sales@example.com
Mon–Fri 8:00–17:30

Precision Bearings & Drives

Ground to 2 µm of bore runout before a 6205 ever reaches assembly.

Deep-groove, angular-contact and spherical roller bearings sit alongside linear guides, gearboxes and couplings, sized to your duty point. Every batch is checked on calibrated gauges in the metrology room before it reaches the shelf.

Browse components Talk to an engineer
Radial runout held on every P5-class batch
2 µm
L10 rated bearing life at the nominal load point
40,000 h
Bore range held in stock
0.3–200 mm
Ground to 2 µm of bore runout before a 6205 ever reaches assembly.

How we work

Four checkpoints before a drive leaves the metrology room

Each step is logged against the same inspection sheet, start to finish.

  1. Send application details

    Load, speed, temperature and shaft sizes — one email starts it.

  2. Engineering review

    We match series, clearances and options, and quote with specifications.

  3. Verify & prepare

    Batch-sampled in the metrology room, matched, marked and packed.

  4. Deliver & support

    Mounting guidance, lubrication planning and downtime response.

Matched to the Duty Point

Components selected to your load, speed and environment — not to a catalogue ideal.

Metrology-Room Verified

Incoming batches sampled on calibrated instruments before they reach the shelf.

Stock That Ships

Dimensional-standard inventory with same-day dispatch on downtime calls.

Engineering Support

Mounting guidance, failure analysis and lubrication planning from one desk.

Browse

Sorted by rotation, motion and drive

Nine component families covering rotation, linear motion and everything that connects them.

Ball Bearings Ball Bearings 2 models Roller Bearings Roller Bearings 2 models Linear Motion Linear Motion 2 models Gearboxes Gearboxes 2 models Couplings Couplings 2 models Belts & Pulleys Belts & Pulleys 2 models Chains & Sprockets Chains & Sprockets 2 models Lubrication Systems Lubrication Systems 2 models Seals & Housings Seals & Housings 2 models
Matched sets leave assembly with their own inspection sheet

Assembly & logistics

Matched sets leave assembly with their own inspection sheet

Matched sets, measured chain lengths and machined shaft ends are prepared in-house with in-process checks at every station, so tolerances have nowhere to hide before the crate is sealed.

Our testing & QA

Engineered picks

Where engineers start the spec sheet

The parts our application engineers specify most.

References

Heard from plant maintenance and reliability leads

The bearings arrived with the clearance class we actually asked for, and the mounting sheet was written for the fitter, not the lawyer.
Marek D. Plant maintenance lead
A gearbox seized on a Friday shift. The matched replacement was on the truck the same day with the alignment offsets printed on the box.
Alina S. Production engineer
Their failure analysis found the real cause — a blocked lube line, not the bearing. The report saved us from replacing the wrong part forever.
Georg T. Reliability engineer
Every batch earns its place in the metrology room

Proof, not promises

Every batch earns its place in the metrology room

Bore, roundness, hardness and running noise are sampled on calibrated instruments before a batch is released to stock. The measurements that pass become the shipment's inspection record.

Request a quote

Insights

Notes from the application desk

Mounting practice, lubrication planning and alignment notes from our engineers.

Your duty point, matched and quoted in one business day.

Send the load, the speed and the shaft sizes today — an engineered recommendation with specifications comes back within one business day.

Start your inquiry