Equipment catalogue

Reverse osmosis, ultrafiltration, nanofiltration, EDI, reuse and desalination trains — every model with its projected envelope.

Reverse Osmosis

Clearflow RO-BW 120

Two-stage brackish RO skid for boiler make-up and general process duty.

  • 12 m³/hPermeate
  • 99.50 %Rejection
  • 75 %Recovery
  • 0.86 kWh/m³Specific energy
Datasheet
Reverse Osmosis

Clearflow RO-BW 400

Tapered two-stage brackish RO rack for continuous demineralised water supply.

  • 40 m³/hPermeate
  • 99.55 %Rejection
  • 78 %Recovery
  • 0.89 kWh/m³Specific energy
Datasheet
Seawater Desalination

Clearflow RO-SW 450

Seawater RO train with isobaric energy recovery for coastal potable and process supply.

  • 45 m³/hPermeate
  • 99.75 %Rejection
  • 45 %Recovery
  • 2.62 kWh/m³Specific energy
Datasheet
Seawater Desalination

Clearflow RO-SW 2000

Full seawater desalination hall — six parallel banks with isobaric energy recovery.

  • 200 m³/hPermeate
  • 99.78 %Rejection
  • 45 %Recovery
  • 2.58 kWh/m³Specific energy
Datasheet
Ultrafiltration

Clearflow UF-HC 150

Compact hollow-fibre UF skid delivering SDI15 below 3 to a downstream RO train.

  • 15 m³/hPermeate
  • 99.99 %Rejection
  • 92 %Recovery
  • 0.12 kWh/m³Specific energy
Datasheet
Ultrafiltration

Clearflow UF-PV 600

Outside-in PVDF ultrafiltration rack on fixed-flux control for high-turbidity feeds.

  • 60 m³/hPermeate
  • 99.99 %Rejection
  • 93 %Recovery
  • 0.14 kWh/m³Specific energy
Datasheet
Nanofiltration

Clearflow NF-SD 300

Nanofiltration softening train removing hardness, sulphate and colour without full demineralisation.

  • 30 m³/hPermeate
  • 92.00 %Rejection
  • 75 %Recovery
  • 0.61 kWh/m³Specific energy
Datasheet
Electrodeionization

Clearflow EDI-ST 40

Continuous electrodeionization polisher taking RO permeate to 18.2 MΩ·cm without regenerant chemicals.

  • 4 m³/hPermeate
  • 99.90 %Rejection
  • 95 %Recovery
  • 0.16 kWh/m³Specific energy
Datasheet
Electrodeionization

Clearflow EDI-XL 120

High-capacity EDI bank for power station and microelectronics polishing duty.

  • 12 m³/hPermeate
  • 99.92 %Rejection
  • 95 %Recovery
  • 0.18 kWh/m³Specific energy
Datasheet
Water Reuse

Clearflow MBR-RX 900

Membrane bioreactor for tertiary effluent reuse, delivering RO-ready filtrate from mixed liquor.

  • 90 m³/hPermeate
  • 99.99 %Rejection
  • 96 %Recovery
  • 0.55 kWh/m³Specific energy
Datasheet
Water Reuse

Clearflow ZLD-BC 250

High-recovery brine concentration stage for zero-liquid-discharge and minimum-liquid-discharge schemes.

  • 25 m³/hPermeate
  • 99.30 %Rejection
  • 90 %Recovery
  • 3.85 kWh/m³Specific energy
Datasheet
Containerised Skids

Clearflow SKID-MC 60

Plug-and-play containerised RO plant with integrated pre-treatment, CIP and telemetry.

  • 6 m³/hPermeate
  • 99.45 %Rejection
  • 72 %Recovery
  • 1.34 kWh/m³Specific energy
Datasheet

Send us the feed water analysis

Give us a TDS profile, a target permeate spec and a duty flow. Our process desk returns a projected array, a specific-energy figure and a budget envelope — normally inside two working days.