Products
Telecentric, line scan, fixed focal length, illumination and filter products — every model listed with the focal length, distortion, resolution and image circle we test to.
TL-0512
A 0.5× bi-telecentric optic for 2/3″ sensors, holding 0.05 % distortion and 0.06° telecentricity across a 17.6 mm…
TL-0250
A 0.25× large-format telecentric for 1.1″ sensors, covering a 56 mm field with a 9.5 mm depth of…
LS-6082
A 60 mm line scan optic corrected over a 28.5 mm image circle for 8k sensors, resolving 160…
LS-9010
A 90 mm apochromatic line scan lens covering a full-frame 43.3 mm image circle for 16k sensors, corrected…
FX-1216
A fast 12 mm wide-angle C-mount lens for 1/1.8″ sensors, for short working distances inside crowded machine guarding.
FX-2508
A 25 mm low-distortion lens for 1.1″ sensors resolving a 2.74 µm pixel — the default choice for…
MX-5010
A fixed 1:1 macro optic resolving 200 lp/mm with 0.06 % distortion, for wire bond, connector pin and…
UV-3505
A fused-silica 35 mm lens transmitting from 250 nm to 400 nm, for adhesive coverage, coating uniformity and…
IL-R120
A 120 mm ring light with 96 emitters and a diffusing window, holding ±4 % uniformity across a…
IL-B300
A 300 mm bar light for grazing and bright-field web illumination, with a finned housing rated for continuous…
IL-C60
A 60 mm coaxial illuminator with a beam-splitter, for flat specular surfaces where a ring light would only…
FT-BP4
Four hard-coated interference bandpass filters at 450, 525, 630 and 850 nm, each ±10 nm FWHM with better…
Selection help
Tell us what you are inspecting and we will point you at the right product — no obligation, no hard sell.
Describe the part, the accuracy you need and the camera you plan to use. An application engineer replies within one business day.
Most catalogue models are available for evaluation, so you can prove the product on your own parts before ordering.
Standard models ship from stock and quotations normally arrive the same day, including any adapters or accessories.
Application review
Tell us what you need to inspect, the accuracy you have to hold and the camera you plan to use. Our application engineers return a recommendation and a quotation — usually inside one business day.
Tell us the inspection target, required accuracy and camera model. No obligation, no distributor hand-off.
Tell us the inspection target, the accuracy you need to hold and the camera you are using. An application engineer replies within one business day.